Follow these simple steps to reboot the Eagle Eye NuboCam:

• Make sure your Eagle Eye NuboCam is unplugged.
• Remove the bottom cap using the screwdriver.
• Press and hold the reset button (see illustration).
• Reapply the power while still holding the reset button, the lights flash blue-red shortly.
• Release the reset button after 5 seconds.
• Wait until the led starts blinking green
• Reconnect the camera by following the 're-connect' wizard
• Once the Eagle Eye NuboCam has been re-connected, you can reassemble the bottom cap.

Please note: you do need to remove the camera from the account in order to reset it